Hot Spot Videos

  1. Clean Econ Filter, Hot Spot

      I will be explaining to you how to turn on clean cycle, economy mode and adjust filter time on your Hot Springs Hot Spot. These easy steps will allow you to enjoy all these unique features your spa offers. Clean Cycle: Scroll through the menu with the down arrow until you see clean. Hit the plus button to circulate the water for 10 minutes. Economy: Scroll through the menu with the down arrow until you see tools. Hit the plus sign. Scroll down until you spot ECON- and hit the plus sign (do the same with ECON+ to turn it off with the minus button). This will allow the hot tub to heat whenever the cycle is on. Adjust Filter Time: Scroll through the menu with the down arrow ..
    Read more
  2. Door Panel, Hot Spot

      Watch this short video so you know how to remove your front door panel in your Hot Spot hot tub. Efficient for you to remember the next time you repair your spa. Removing Door Panel: Remove all 3 screws from the front panel on the right side with a screwdriver or drill. Pull the slat holding and panel out once the screws are removed. Locate the clips so you know how to slide the panel back on. Once it is in place, align the slat and screw the panel back on.   Shop All Hot Spot Parts ..
    Read more
  3. Fill Tub, Hot Spot

      I will be quickly going over how to fill your Hot Spot hot tub. These simple steps will set you up for soaking in your spa in no time! Filling Hot Tub: Make sure the drain plugs are on, located on the front panel below your controls. Go to your filter area and remove the cap and cover to the filter. Once it is open, place your hose as far down into the standpipe as you can go. Now turn the water on until it reaches the midway point between the jets and the pillows. Turn off the water. Remove the hose from the filter and replace the grey cap and cover. You can now power on your hot tub.   ..
    Read more
  4. Lights, Hot Spot

      Adjusting the lights and brightness of your display has never been easier for the Hot Spot models. I will be describing and showing you how to go through the settings and save your new changes.   Adjusting Brightness: Scroll down through the modes until you see LCD under tools and press the plus sign. You can adjust the brightness from 1 to 3 and click exit to save your changes. Adjusting Lights: Click the lights button on the main panel to turn them ON/OFF. Scroll down through the modes until you see lights under tools and press the plus sign. Scroll down until you see the color option. Pressing the plus sign will cycle you through the colors. If you scroll down a setting you will ..
    Read more
  5. Music System, Hot Spot

      Pairing your music system for your Hot Spot hot tub has never been easier! I will be explaining to you a few simple steps to getting your music to soothe you while you relax in your spa. Pairing Bluetooth: Scroll through the menu with the arrows and click the plus sign. Check to make sure your setting is on +. Scroll until you find setup and hit the plus sign again. Scroll down and when you see pair, press the plus sign once more. When you see it blinking, it is pairing. My Spa BTXR will appear on your mobile device in the Bluetooth settings for you to activate your music. To exit the menu on your controls, scroll down to exit and hit plus.   ..
    Read more
  6. Start Up, Hot Spot

      Knowing the right chemicals to put in your hot tub is extremely important. You will need all the Freshwater products in this video for the proper start up. I will be showing you everything needed for you to relax in your spa for the first time! *Turn the jets on before adding chemicals to the filter area of your spa. Stain Scale Control Use a test strip to check the hardness level and add the substance accordingly. Pour the whole bottle in your hot tub if your hardness is 450-800 ppm (3-5 person tub 1/3 the ..
    Read more
  7. Orientation Chemicals, Hot Spot

      If you are looking to learn more about the Freshwater line of hot tub products, you have found the right video! Our guide will tell you everything you need to know about the spa products and how to use them. Five Way Test Strips Tests for Bromine, Chlorine, Alkalinity, pH, and hardness levels. Test your water weekly with one test strip. Chlorine ..
    Read more
  8. Hot Spot Control Panel Operation 2015-

    Hot Spot Control Panel operation,Hot Spot Control Panel operation Hot Spot Control Panel operation ..
    Read more
  9. Hot Spot Control Panel Operation 2012-2014

    Operation of a Hot Spot Control panel 2012-2014   ..
    Read more
© 2024 Hot Tub Spa Supplies

|

eCommerce Design by DotcomWeavers