Start up your Limelight hot tub by watching our simple tutorial video. You will have all it takes to start up your spa to begin your first soak.

*Turn the jets on before adding chemicals to the filter area of your spa.

Stain Scale Control

  1. Use a test strip to check the hardness level and add the substance accordingly.
  2. Pour the whole bottle in your hot tub if your hardness is 450-800 ppm (3-5 person tub 1/3 the bottle, 6-8 person tub 2/3 the bottle).
  3. Let the water circulate for 15 minutes before using a test strip.

Five Way Test Strips

  1. Tests for Bromine, Chlorine, Alkalinity, pH, and hardness levels.
  2. Test your water weekly with one test strip and add chemicals accordingly.

pH Alkalinity Up & pH Alkalinity Down

  1. 1 capful is equal to 1 shade on the test strip.
  2. Test until you have reached the desired OK level and let it circulate for 15 minutes again.

Chlorine Concentrated Granules

  1. Add 1 capful to shock your hot tub, add 2 capfuls if you have a 5+ person hot tub.
  2. After pouring the concentrate into your filter area, run the hot tub for 2 hours before getting in.

Vanishing Act Calcium Remover

  1. Place the pillow over the vent that is on the opposite side of the controls.
  2. Activate the Vanishing Act by clicking options, then set-up, then more, and then you will hit the button next to Vanishing Act.
  3. Flip the pillow to the other side after 12 hours.
  4. Once it has been 24 hours, throw away the pillow and add salt to your water.

Spa Salt

  1. On the back of the bag you will see a chart that tells you how many cups of salt you need to add per the amount of gallons of water.
  2. Use the cup in the bag to scoop the salt into the center of your hot tub.
  3. Once it has been 24 to 48 hours, you may relax in your spa!

 

Shop All Freshwater Hot Tub Chemicals

 

Subscribe ➡️ https://www.youtube.com/@hottubspasupplies4420