Specifically formulated for spas, this concentrated granular chlorine effectively sanitizes and disinfects hot water.
Add 1/2 oz. of this product per 500 gallons ofwater prior to entering spa. Wait 5 minutes then check chlorineresidual. Residual chlorine must read between 2 and 3 ppm. If it doesnot, additional dosages of material should be added until it does. Oncethe chlorine residual is established in the 2 to 3 ppm range, the spaor hot tub may be entered
Thisproduct should be added daily or as necessary to maintain 2 to 3 ppmresidual chlorine. Frequent checks should be made of residual chlorineusing a reliable test kit. This product should be broadcast over thesurface of the water and allowed at least 5 minutes mix time beforetesting. Note: Heavy bather usage or the use of oils or lotions mayincrease the chlorine demand resulting in the need for more frequentchecks of chlorine residual. pH should be monitored with a reliabletest kit and maintained at 7.2 to 7.8 for clean water. pH can bedecreased by adding a suitable agent such as sodium bisulfate orincreased by adding Aklalinity Up.
Itis good practice to superchlorinate every 2 to 4 weeks. Tosuperchlorinate, add 1 oz. of this product for each 500 gallons ofwater. Thoroughly clean spa, vacuum and cycle through filter. Resumeprogram when chlorine residual reads 2 to 3 ppm.