Specifications:
- 2.5 HP, 2 SP, 230V, 60 HZ, 11 AMP (High Speed)
- 2.5 HP, 2 SP, 230V, 60 HZ, 3.3 AMP (LowSpeed)
Removal
- Disconnect power to the spa.
- Access the equipment compartment.
- Drain the spa.
- Disconnect the the jet pump from the control box.
- Remove the copper bonding wire from the bonding lug on the jet pump motor.
Drain the pump by removing bleedline from the drain barbfitting or plug.
- Turn the jet pump unions counterclockwise on the intake and discharge of the jet pump to disconnect them from the plumbing.
Note: Make sure to save the union o-rings.
- Remove the mounting bolt(s) securing the jet pump to the equipment compartment floor.
- Remove the jet pump from the equipment compartment.
- To reinstall the jet pump, reverse steps 1 to 9.
Important: Make sure that the jet pump union o-rings are properly seated when re-tightening the unions.

Item No. |
Part No. |
Description |
1 |
71415 |
Manifold XP Manetek |
2 |
** |
Motor, mag, 48fr, 1.5 hp, 8.0/16.0a, 230/115v |
3 |
71036 |
Fitting, compress 2" w/o-ring |
4 |
71693 |
Volute 48fr xp2 |
5 |
71447 |
Seal, xp |
6 |
71404/na |
Impeller 1.5 hp, xp |
7 |
71409 |
Wear ring, xp |
8 |
71554 |
O-ring, volute |
9 |
71696 |
Cover, suction xp2 |
10 |
32267 |
Drain plug, pump |
11 |
72344 |
Kit, cal, pump hose duct |
12 |
017066 |
Mount, rubber-pump |
13 |
72462 |
Cord assy, pump 14/3, 60" straight yr2002 |
14 |
71413 |
Screw, 8-32 x 5/8, (xp volute) |
15 |
34447 |
O-ring, compress fitting 2" |
16 |
71594 |
O-ring, drain |
* |
72992 |
Pump, 1.5 hp, 230v 60 hz, 1 spd, xp2 (2") |
|