WARNING: The spa high limit is a safety device and should never be bypassed or tampered with.
The spa high limit is a safety device designed to shut off all power to the spa should the water temperature reach 118 (plus or minus 4) degrees F. This will prevent damage to the spa or injury to bathers from excessively hot water.
The spa high limit can be reset when the temperature inside the spa has cooled. To reset the high limit, push the red button on the side of the control box (labeled spa).
NOTE: Often the high limit can be reset upon arriving to service a spa because the water in the spa body has cooled. In these cases, the cause of the high limit trip must be found to prevent the high limit from tripping again.
30208 Spa High Limit is for the following models.
|Hot Spring||Sovereign IH 200v||1994|
|Hot Spring||Classic FH 220v||1994|
| WARNING: The spa high limit is a safety device and should never be tampered with or bypassed. |
NOTE: Thermostats should never be replaced without performing a calibration test.