USED 73181 Caldera Advent Control Box

USED 73181 Caldera Advent Control Box

SKU: 73181

$200.00

We have limited Used boxes.  You would need to order the board part numbers below for new replacement.

Item is discontinued!

 

Use main board 77089 and relay board 77119

 

Control Box Replacement for all Caldera Models 2002- 2008

 

PLease call 914-237-5606 to check availiblilty on used items


 

  1. Disconnect power to the spa.
  2. Access the equipment compartment.
  3. Disconnect the copper bonding wire attached to the side of the control box (if necessary).
  4. Remove the two screws retaining the Advent control box cover and remove the cover.
  5. Disconnect the power supplied to the terminal block.
  6. Disconnect the control panel ribbon cable.
  7. Disconnect the light, circulation pump, jet pump(s), and ozonator terminal connections from the circuit board.
  8. Using strain relief pliers, remove the strain relief and cord from the control box for the circulation pump, jet pump(s) and ozonator.
  9. Disconnect the heater terminal connections from the heater relay terminals.
  10. Using strain relief pliers, remove the heater strain relief and cord from the control box.
  11. Remove the control box from the equipment compartment.
  12. To reinstall the Advent control box, reverse steps 1 to 11.

 

 

Item Decsription Part #
1 Kit CBA Advent Cal N/A Main Board 77089
2 Clamp Romex 3/4 30105
3 Plug Hole 0.3/8" 36043
4 Bushing Strain Relief 3/8" 30099
5a Cord Assy Pump 14/4 Flag 60" 72461
5b Cord Assy Pump 14/3 Flag 60" 72462
6 Strain Releif 3/8" 7K-2 30098
7 Cord Circ Pump Replacement 71434
8 Receptacle Assy Ozone 72474
9 Plug Hole 0.50" 36044
10 Thermostor Hi-Limit 72492
11 Thermistor Control 72493
* Kit Heater Board Replacemnet 74618
* Fuse Sloblo 1/2A 250V 5MM X 20MM 37089
* Program Jumper Sgunt .100 36021
* Kit Cable Assy Press Switch 72639
* Fuseholder 34506
* Fuse 2 Amp 250V 34934
* Kit 12C Comm Hub 8 Port 74150