The Soothing Seven Jet is a larger jet with seven outlets. The seven outlets are designed to massage the tight muscles of the upper back and shoulders.
The intensity of the Soothing Seven Jet increases when more air is injected into the jet. Turning the faceplate can control the amount of air reaching an individual jet. To adjust the air, turn the faceplate clockwise to increase the air or counter-clockwise to decrease the air.
The Soothing Seven Jet consists of a front, and a rear wall fitting, two o-rings, a gasket, and jet face (either white or gray).
Remove the jet by grasping the jet faceplate and pulling it away from the spa shell.
With jet in hand, two o-rings should be on the rear portion of the faceplate. If either o-ring is not present, inspect the inside of the front wallfitting and remove the missing o-ring.
To reinstall the jet, reverse steps 1 to 3. Important: Make sure that the o-rings are properly seated.
Removal
Open or remove the spa cover.
Remove the Soothing Seven jet by grasping the jet faceplate and pulling it away from the spa shell.
With jet in hand, two o-rings should be on the rear portion of the faceplate. If either o-ring is not present, inspect the inside of the front wallfitting and remove the missing o-ring.
To reinstall the jet, reverse steps 1 to 3.
Important: Make sure that the o-rings are properly seated.
