Discontinued
*All Sales Are Final
Starite Max E Glass 1 hp single speed jet pump for pre 1993 Hot Spring models.
The jet pump provides power for the hydrotherapy system by recirculating water from the spa, drawing it through the skimmer and filtration system, and forcing the water through the fixed jets, Moto-Massage jets and Jetstream. These pumps are designed for the presence of water at all times.
The opening at the bottom of the door is a vent for the heat generated by the operation of the jet pump. The vent will eliminate the problem of overheating pump motors and protect the other components for excessive heat. It is important that vent opening be kept clear at all times. If the vent opening becomes obstructed, overheating of the jet pump may occur.
Caution: Installation of a rodent screen may increase the possibility of obstructing the vent opening with debris.
On later model spas, each jet pump is equipped with a pump shroud. The pump shroud is attached to the rear of the jet pump. This shroud is a vent for the heat generated by the operation of the jet pump motor. The shroud will eliminate the problem of overheating pump motors and protect the other components for excessive heat. It is important that the vent outlet for the pump shroud be kept clear at all times. If the pump shroud outlet vent becomes obstructed, overheating of the jet pump may occur.
|
Removal
|
|
** Order Pump, Complete listed above N/A Part Not Available |