Hot Spring 73542 Dual Moto Jet Assembly Kit, Warm Grey

$105.29
In stock
SKU
73542
Add to Wish List
In stock

Add to wishlist
73542
73542

The Moto-Massage is a jet that automatically travels up and down to massage a person's back. The mixing of air and water in a jet along with a playable spine causes the sweeping motion of the Moto-Massage. The intensity and speed of the Moto-Massage can be adjusted with the air control valve. The Moto-Massage is curved to fit the curvature of the back.

The Moto-Massage consists of a jet nozzle, water tube, threaded fitting, vertebrae and an air tube with o-ring. The Moto-Massage is held in-place by a special recess behind the spa shell. A shim is used to assist in proper movement of the Moto-Massage.

73542 Dual Moto Jet Assembly Warm Grey Kit is for the following models.

 

Make Model Date Range
Hot Spring Grandee 2005-2013
Hot Spring Vista  2005-2013
Hot Spring Envoy 2005-2013
Hot Spring Vanguard 2005-2013
Hot Spring Jetsetter 2005-2013
Hot Spring Sovereign 2005-2013
Hot Spring Accolade 2005-2006
Hot Spring Aria 2007-2013
Specifications

Item Description Part Number
1a Facia Plate Duel Moto Cool Grey 73537
1b Facia Plate Duel Moto Warm Grey 73538
2 screw 10-16 34366
3a screw cover cool grey 36510
3b screw cover warm grey 73306
4 duel moto jet warm grey 73542
5 air tube w/ oring 73539
6 abrasion cap 30723
7 o ring Moto air tube 33020
8 Niche Air fittting (buy assembly) 73540
9 Manifold w/ airline assembly 73540
** Check Valve 38390
Removal
  1. Open or remove the spa cover.
  2. Using a standard blade screwdriver, remove the three faceplate screw covers.
  3. Remove the three screws securing the Moto Massage faceplate to the spa.
  4. Remove the Moto Massage faceplate.
  5. Reach into the jet recess and locate the air tube. Gently remove this tube from the barbed nipple at the back of the recess.
  6. Grasping the base of the Moto Massage (end closest to the rear of the jet recess) gently turn the entire assembly counterclockwise until it can be removed.
  7. To reinstall the Moto Massage, reverse steps 1 to 6.

Important Instructions Regarding Moto Massage Alignment:

In order the for the Moto Massage to operate properly it is imperative that the Moto Massage nozzle be properly positioned after the assembly is tightened in the Moto niche.

To properly align, ensure that the two holes located on the nozzle face are position horizontally and that the Moto assembly travels vertically within the niche.

© 2019 Hot Tub Spa Supplies

|

eCommerce Design by DotcomWeavers