Oval Moto Faceplate in Cool Grey for Hot Springs & Solana 1997 - Current Spa Models
The Moto-Massage is a jet that automatically travels up and down to massage a person's back. The mixing of air and water in a jet along with a pliable spine causes the sweeping motion of the Moto-Massage. The intensity and speed of the Moto-Massage can be adjusted with the air control valve. The Moto-Massage is curved to fit the curvature of the back.
The Moto-Massage consists of a jet nozzle, water tube, threaded fitting, vertebrae, and an air tube with an o-ring. The Moto-Massage is held in place by a special recess behind the spa shell. A shim is used to assist in proper movement of the Moto-Massage.
|1a||Facia Plate Moto White||36079|
|1b||Facia Plate Moto C Grey||36511|
|1c||Facia Plate Moto W Grey||73305|
|3a||Screw Cover Moto White||36144|
|3b||Scrrew Cover Moto c grey||36510|
|3c||Screw Cover Moto w grey||73306|
|3d||Screw Cover Taupe||71896|
|4||Moto Jet Assembly white||73307|
|5||Air Tube with o oring||70307|
|6||Abraision cap (air tube)||30723|
|7||O ring moto air tube||33020|
|8a||Extrusion shim MM Short||36143|
|8b||Extrusion shim MM Long||36557|
* Non Illustrated Part
Important Instructions Regarding Moto Massage Alignment:
In order the for the Moto Massage to operate properly it is imperative that the Moto Massage nozzle be properly positioned after the assembly is tightened in the Moto niche.
To properly align, ensure that the two holes located on the nozzle face are position horizontally and that the Moto assembly travels vertically within the niche.