Tiger River Spa Parts

part # 1044101

Over time the ozonator check valves can break down causeing backflow of water and not creating bubbles (the ozone injection process)

This check valve is a replacement for all Hot Spring Tiger River Spas.

replaces  #34658 3/16" valves

The JED 1003 is a CD or "corona discharge" type ozone generator designed for water purification For Hot SPring Spas.  It is typically installed in conjunction with a venturi injector, bypass adapter, or dedicated air jet.  In smaller, portable hot tubs, it should be used with an adequate contact or mixing chamber.
-Specifications-
Ozone output:  0.2 grams per hour
Input voltage 120 VAC, 60 Hz  (240V units are marked accordingly)
Operating current - 0.5 Amperes
Power consumption - 60 Watts

It is ideal for The Tiger River Siberian or Caspian.  Ozone System comes with air tubing,air check valve, and plug to go in hotspring spas 1995 to current

ED 103 CORONA DISCHARGE OZONATOR.  The JED 103 is a CD or "corona discharge" type ozone generator designed for water purification for hot springs, tiger river spas. It is typically installed in conjunction with a venturi injector or dedicated air jet. -Specifications- Ozone output: 0.1 grams per hour Input voltage 120 VAC, 60 Hz (240 VAC, 60Hz units are special order marked accordingly) Operating current - 0.25 Amperes Power consumption - 30 Watts

It is ideal for spas 350 gallons or smaller.  Ozone System comes with air tubing,air check valve, and plug to go in a Tiger River Manora, Bengal, Tondi, and Summatran.

Part # 74078

The injector fits in-line after the Silentflo 5000 (discharge side and after the heater). This Kynar Ozonator by Watkins manufacturing. An injector creates a vacuum (venturi effect) as water passes through it to enabling ozone gas  to enter the low flow plumbing of a Hot Spring or Tiger River spa in a pre-determined measure.